| | |
|
|
|
|
Door switch arrives in a box, with a Quadratec 2004 Summer Catalogue - Laurie Bridger (Laurie)
Viewed: 5190 times.
|
| Remove the retaining strap that holds the glove box by sliding it towards the passenger door - Laurie Bridger (Laurie)
Viewed: 5351 times.
|
| Remove the glove box by opening it down and pulling it to the rear of the vehicle. - Laurie Bridger (Laurie)
Viewed: 4915 times.
|
|
| | |
| | |
|
|
|
|
Move the Antenna Lead up and out of the way - Laurie Bridger (Laurie)
Viewed: 4890 times.
|
| Fuse 4 is the fuse that will be replaced with the switch loom. - Laurie Bridger (Laurie)
Viewed: 5097 times.
|
| Using the end of the loom with the fuse in it (supplied), insert the red wire on the right and the black wire on the left - Laurie Bridger (Laurie)
Viewed: 6089 times.
|
|
| | |
| | |
|
|
|
|
Move the loom up to the left and place it in the existing clip - Laurie Bridger (Laurie)
Viewed: 5898 times.
|
| Pass the other end of the loom down through the lower right corner - Laurie Bridger (Laurie)
Viewed: 5056 times.
|
| Replace the Antenna lead in the clip - Laurie Bridger (Laurie)
Viewed: 5424 times.
|
|
| | |
Album: 
1 
